TPS25 Header Box Tube-Sheet Welding Head
| Previous | 3 / 9 | Next |
- Most Popular Header Box Welding Expert
- Suitable for Header Box tube to tube-sheet welding, with AVC tracking and long distance on twisting
Product Description
This welding head is specially designed TIG welding head for header box tube to tube-sheet. It can weld carbon steel, stainless steel, and indented/flush tube to tube-sheet connection. And its suitable tube diameter is Φ25mm and Φ32mm with wire feeding or self-fusion.Support equipment: iArc400 Programmable Orbital Welding Power Source.
Application: Boiler, heat exchanger, military, power plant, petrochemical and so on.Features
- Suitable for the special heat exchanger in chemical industry, e.g. air cooler with hydrogenation
- Perfect solution of deep hole welding with wire feeding
- Narrow space for welding with screw thread hole to reach depth of 120~230mm
- Customization according to specific requirements
- Torch angle negative degree application
Specification
| Material | Carbon steel, stainless steel |
| Tube OD(mm) | Φ25 or Φ32 (standard Φ25) |
| Max Depth for Inner Tube(mm) | 230 (including plate thickness) |
| Connection | Flush tube |
| Tungsten Diameter(mm) | бщ2.4 |
| Rotation Speed(rpm) | 0.37~7.39 |
| Torch Angle | -3° |
| Arc adjusting Distance(mm) | 18 |
| Max wire feeding Speed(mm/min) | 1800 |
| Tungsten Diameter(mm) | бщ0.8 |
| Protective Gas | Ar |
| Cooling | Water |
| Cooling Flow(ml/min) | ≥600 |
| Duty Cycle | 200A 60% |
| Weight(kg) | 13 (no cable) |
| Dimension(mm) | 780x290x310 |
